Datalogic QuickScan Lite QW2100

Keyboard Interface
62 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Intercode Delay
Specifies the delay between labels transmitted to the host for this interface. The selectable range
for this feature is from 0 to 99 seconds. See Intercode Delay on page 259 for more detailed
programming instructions.
$CKBID
Set Intercode Delay
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
~
CANCEL
DEFAULT
00 = No Wedge Intercode Delay