LED and Beeper Indicators
Product Reference Guide 29
ENTER/EXIT PROGRAMMING MODE
Good Read LED Duration
This feature specifies the amount of time that the Good Read LED remains on following a good
read. The good read LED on time can be set within a range of 0.1 to 25.5 seconds in 100ms
increments. See Good Read LED Duration on page 245 for more detailed programming instruc-
tions.
$CLAGL
Select Good Read LED Duration Setting
Make a mistake? Scan the CANCEL bar code to abort and not
save the entry string. You can then start again at the beginning.
~
CANCEL
DEFAULT
020 = Good Read LED stays on for 2
seconds.
NOTE
Indicators are dimmed during sleep.
To Next Page
Loading...
