Datalogic QuickScan Lite QW2100

Symbologies
234 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Code 4 and Code 5 Common Configuration Items
The following options apply to both Code 4 and Code 5 symbologies.
Code 4 and 5 Decoding Level
Decoding Levels are used to configure a bar code symbology decoder to be very aggressive to
very conservative depending on a particular customer’s needs. See Decoding Levels on
page 267 for more detailed programming instructions.
NOTE
This configuration item applies to Code 4 and Code 5.
$CC5DL01
Code 4 and Code 5 Decoding Level = 1
$CC5DL02

Code 4 and Code 5 Decoding Level = 2
$CC5DL03

Code 4 and Code 5 Decoding Level = 3
$CC5DL04

Code 4 and Code 5 Decoding Level = 4
$CC5DL05

Code 4 and Code 5 Decoding Level = 5
DEFAULT