General Features
20
QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Power Save Mode
When this feature is enabled, the reader will enter Power Save Mode (a lower power
consumption state) after being idle (no scanner activity) for one second.
NOTE
RS-232 and USB interfaces ONLY.
A reader having a Scan Mode setting of Object Sense, Stand Mode,
Flashing, or Always On will not enter Power Save Mode. (The reader
is always internally active when in these modes.)
$CSLEN00
Power Save Mode = Disabled
$CSLEN01
Power Save Mode = Enabled
DEFAULT
To Next Page
Loading...
