Datalogic QuickScan Lite QW2100

Symbologies
198 QuickScan
TM
Lite QW2100
ENTER/EXIT PROGRAMMING MODE
Standard 2 of 5 — cont.
Standard 2 of 5 Check Character Transmission
This feature enables/disables transmission of an optional Standard 2 of 5 check character.
Standard 2 of 5 Minimum Reads
This feature specifies the minimum number of consecutive times a Standard 2 of 5 label must be
decoded before it is accepted as good read.
$CS2CT00
Standard 2 of 5 Check Character Transmission = Don’t Send
$CS2CT01

Standard 2 of 5 Check Character Transmission = Send
DEFAULT
$CS2MR01
Standard 2 of 5 Minimum Reads = 1
$CS2MR02

Standard 2 of 5 Minimum Reads = 2
$CS2MR03

Standard 2 of 5 Minimum Reads = 3
$CS2MR04

Standard 2 of 5 Minimum Reads = 4
DEFAULT