Busbar
CANbus
Tie
breaker
(TB 17)
Mains
breaker
(MB 17)
Mains 17
Load
G
Generator
breaker
(GB 3)
Diesel generator set 3
AGC 146
AGC 242
G
Generator
breaker
(GB 1)
Diesel generator set 1
AGC 242
G
Generator
breaker
(GB 2)
Diesel generator set 2
AGC 242
The tie breaker has to be normally closed (NC) if the plant is to be used for fixed power, mains
power export or peak shaving.
It is also possible to use AGC-3 and AGC-4 in a power management system with AGC 145/146.
8.3 Power management setup
8.3.1 How to set up
The AGC is set up using the display and the PC utility software. The quick setup is used to set up with the
display.
8.3.2 PC software setup
The communication ID must be adjusted in the utility software for each of the AGC units. In the screenshot
below, the internal communication ID is set to 17.
AGC 100 Designer's Reference Handbook
4189340766 UK
Power management (AGC 14x only)
DEIF A/S Page 111 of 152
To Next Page
Loading...
