Deif AGC 100 - RMI Oil

RMI water: Cooling water temperature
RMI fuel: Fuel level sensor
For each type of RMI, it is possible to select between different characteristics including a configurable one.
6.21.3 RMI oil
This RMI input is used for measuring the lubricating oil pressure.
● Sensor type 1 = VDO
● Sensor type 2 = VDO
● Sensor type 4 = ESP-100
RMI sensor type
Pressure Type 1 Type 2 Type 3 Type 4 Configurable RMI
Bar psi Ω Ω Not used Ω Ω
0 0 10.0 10.0 240
0.5 7 27.2
0.7 10 200
1.0 15 44.9 31.3
1.4 20 165
1.5 22 62.9
2.0 29 81.0 51.5
2.1 30 135
2.5 36 99.2
2.8 40 123
3.0 44 117.1 71.0
3.4 50 103
3.5 51 134.7
4.0 58 151.9 89.6
4.1 60 88
4.5 65 168.3
4.8 70 74
5.0 73 184.0 107.3
5.5 80 60
6.0 87 124.3
6.2 90 47
6.9 100 33
7.0 102 140.4
8.0 116 155.7
9.0 131 170.2
10.0 145 184.0
AGC 100 Designer's Reference Handbook
4189340766 UK
Additional functions
DEIF A/S Page 80 of 152