2. General product information
2.1 Introduction
2.1.1 Introduction
This chapter will deal with the unit in general and its place in the DEIF product range.
The AGC is part of the DEIF Multi-line 2 product family. Multi-line 2 is a complete range of multi-function gen-
erator protection and control products integrating all the functions you need into one compact and attractive
solution.
The concept of the AGC is to offer a cost-effective solution to genset builders, who need a flexible generator
protection and control unit for small single to medium and large genset applications. Being part of the Multi-
line product family, the standard functions can be supplemented with a variety of optional functions.
2.2 Type of product
The Advanced Genset Controller is a micro-processor based control unit containing all necessary functions
for protection and control of a genset.
It contains all necessary 3-phase measuring circuits, and all values and alarms are presented on the LCD
display.
2.3 Options and variants
2.3.1 Options and variants
The AGC 100 family consists of different variants to cover applications in a cost-efficient way. Options cover
e.g. protections for generator, busbar and mains, power management (non sync.), serial communication, ex-
ternal input or output, additional operator display, emulation etc.
A complete list of available variants and options is included in the data sheet. Please see
www.deif.com
2.4 Setup of the controller
2.4.1 Setup of the controller
The parameter settings and M-Logic programming can easily be done via a PC Windows
®
-based utility soft-
ware (USW). The USW is password-protected - for further information please read the help file in the USW
editor.
To interface the AGC 100 from the PC, there are two possibilities. One is option J5, which is RS232 with an
interface box between the PC and the AGC 100. The other option is J9, which is USB to TTL interface be-
tween the PC and the AGC 100. Both cable options J5 and J9 are galvanically isolated and will protect your
PC if it is connected during genset operation.
The PC utility software offers additional features such as monitoring of all relevant information during commis-
sioning, saving and downloading of settings and downloading of software updates.
AGC 100 Designer's Reference Handbook
4189340766 UK
General product information
DEIF A/S Page 9 of 152
To Next Page
Loading...
Need help?
General
