3.8 Sequences
3.8.1 Sequences
The following contains information about the sequences of the engine, the generator breaker, and the mains
breaker. These sequences are automatically initiated if the auto mode is selected.
In the manual or semi-auto mode, the selected sequence is the only sequence initiated (e.g. press the
START push-button: the engine will start, but not close the breaker).
The following sequences will be illustrated below:
● START sequence
● STOP sequence
● Breaker sequences
AGC 100 Designer's Reference Handbook
4189340766 UK
Functional descriptions
DEIF A/S Page 31 of 152
To Next Page
Loading...
