1. Digital input alarm configured to NC, normally closed
This will initiate an alarm when the signal on the digital input disappears.
2. Digital input alarm configured to NO, normally open
This will initiate an alarm when the signal on the digital input appears.
The relay output function can be selected to be ND (Normally Deenergised), NE (Normally Ener-
gised), Limit or Horn.
Dig in
Multi-line 2
Com
+ V DC
Alarm
input
Relayout
6.24 Language selection
The unit has the possibility to display different languages. It is delivered with one master language which is
English. This is the default language, and it cannot be changed. In addition to the master language 11 differ-
ent languages can be configured. This is done via the PC utility software.
The languages are selected in the system setup menu 6080. The language can be changed when connected
to the PC utility software. It is not possible to make language configuration from the display, but the already
configured languages can be selected.
6.25 Text in status line
This table explains the different messages in the status line text.
AGC 100 Designer's Reference Handbook
4189340766 UK
Additional functions
DEIF A/S Page 87 of 152
To Next Page
Loading...
