Dell EMC ML3 User Manual

Appendix A. Library Configuration Forms
Make a copy of these forms, and fill them out as you are installing and configuring your library. Update
the forms each time that changes are made to the library configuration and store these forms in a secure
location. Having the information on these forms are helpful if a call to service is necessary.
You can also save library configuration data from the Management GUI. See “Locating Management
functions” on page 63.
137

Dell EMC ML3 Specifications

General

Number of Drives	1
Category	Tape Library
Drive Technology	LTO
Humidity	20% to 80% (non-condensing)
Drive Type	LTO Ultrium
Maximum Capacity	15 TB (compressed)
Interface	6Gb/s SAS
Max Data Transfer Rate	up to 750 MB/s (with compression)
Operating Temperature	10°C to 35°C
Non-operating Temperature	-40°F to 140°F (-40°C to 60°C)