Dell Networking N4000 Series User Manual

122 Hardware Overview
Table 3-16 shows the 100/1000/10000Base-T port LED definitions.
Module Bay LEDs
The following tables describe the purpose of each of the module bay LEDs
when SFP+, 10GBase-T, and QSFP modules are used.
Table 3-16. 100/1000/10000Base-T Port Definitions
LED Color Definition
Link LED Off There is no link.
Solid green The port is operating at 10 Gbps.
Solid amber The port is operating at 100/1000 Mbps.
Activity LED Off There is no current transmit/receive activity.
Blinking green The port is actively transmitting/receiving.
Table 3-17. SFP+ Module LED Definitions
LED Color Definition
Link LED Off There is no link.
Solid green The port is operating at 10 Gbps.
Solid amber The port is operating at 100/1000 Mbps.
Activity LED Off There is no current transmit/receive activity.
Blinking green The port is actively transmitting/receiving.
Table 3-18. 10GBase-T Module LED Definitions
LED Color Definition
Link LED Off There is no link.
Solid green The port is operating at 10 Gbps.
Solid amber The port is operating at 100/1000 Mbps.
Activity LED Off There is no current transmit/receive activity.
Blinking green The port is actively transmitting/receiving.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)