Dell Networking N4000 Series - Page 513

Configuring Port and System Security 513
series switches. For details about the fields on a page, click at the top of
the page.
Dot1x Authentication
Use the Dot1x Authentication page to configure the 802.1X administrative
mode on the switch and to configure general 802.1X parameters for a port.
To display the Dot1x Authentication
page, click Switching → Network
Security
→ Dot1x Authentication → Authentication in the navigation panel.
Figure 19-2. Dot1x Authentication
To configure 802.1X authentication on multiple ports:
1
Open the Dot1x Authentication page.