Dell Networking N4000 Series User Manual

Configuring L2 Multicast Features 819
4 In the Bridge Multicast Group tables, assign a setting by clicking in the
Static row for a specific port/LAG. Each click toggles between S, F, and
blank. (not a member).
5 Click Apply .
The bridge multicast address is assigned to the multicast group,
ports/LAGs are assigned to the group (with the
Current rows being
updated with the
Static settings), and the switch is updated.
Removing a Bridge Multicast Group
To delete a bridge multicast group:
1
Open the Bridge Multicast Group page.
2 Select the VLAN ID associated with the bridge multicast group to be
removed from the drop-down menu.
The
Bridge Multicast Address and the assigned ports/LAGs display.
3 Check the Remove check box.
4 Click Apply .
The selected bridge multicast group is removed, and the device is updated.

Dell Networking N4000 Series Specifications

General

Layer	Layer 3
Switching Capacity	Up to 1.28 Tbps
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Series	N4000 Series
Stacking	Up to 12 units
Power Supply	Dual, hot-swappable
Management	Web, CLI, SNMP
Humidity	10% to 90% (non-condensing)