162
Zone2 Surround
• When Zone2 is used with a 5.1- or 7.1-channel system, various surround modes can be selected according to the program source being played.
• The desired sound field can be achieved by adjusting the parameters for the various surround modes.
2
Select the surround mode.
q Dolby Digital and DTS surround
mode.
RC-995
1
2-q
2-w
4
3,5
2
2-e
2-r
5
1
Select the ZONE2 mode using the AMP/Z2 button.
3
Press the SURROUND PARAMETER button.
Display the Surround Parameter Menu.
The surround mode switches in the following order each time the DSP
SIMULATION button is pressed:
WIDE SCREEN
JAZZ CLUB
SUPER STADIUM
ROCK ARENA
CLASSIC CONCERT
MONO MOVIEMATRIX VIDEO GAME
VIRTUAL
See pages 129, 140~144, 147 for a description of the features of the
various surround modes.
NOTE:
• The following surround modes can be selected in Zone2: STEREO,
DOLBY/DTS SURROUND, 5/7CH STEREO, WIDE SCREEN, SUPER
STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO
MOVIE, VIDEO GAME, MATRIX and VIRTUAL.
(Remote control unit)
4
q Select the various parameters.
(Remote control unit)
w Adjust the parameter settings.
(Remote control unit)
5
Press the ENTER or SURROUND PARAMETER button to complete the setting.
or
(Remote control unit)
(Remote control unit)
(Remote control unit) (Remote control unit)
w DSP surround simulation mode.
(Remote control unit) (Remote control unit)
e STEREO mode.
(Remote control unit) (Remote control unit)
r 5CH/7CH STEREO mode.
(Remote control unit) (Remote control unit)