Denon AVR-5805 - Preset Name

70
Repeat step 5 to input the preset channel name.
6
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
If you wish to set the preset channel name back to as it was initially, press the Cursor down
button with the preset channel name highlighted.
If “Yes” is selected for “Default”, the setting are automatically reset to the default name.
7
Once all the characters have been input, press the ENTER button.
The Preset Name screen reappears.
Use the same procedure to change other input source names as well.
CH SEL
ENTER
(Main unit) (Remote control unit)
8
When the Cursor down button is pressed at the very
bottom of the screen, the screen for the next preset
memory block appears.
It is also possible to select the desired preset
memory block by selecting “Block” then pressing
the Cursor left and right buttons.
CH SEL
ENTER
(Main unit) (Remote control unit)
¥ĻáĿ©őŭŠŮŠů¥ŏŜŨŠ
¥¥ŃŧŪŞŦ¥¥¥Ń
¥¥Ńĺ
łŎ ¥¥¥ľĸĸŦ«
¥¥ŃĻ
łŎ ¥¥ĹĸĸĸŦ«
¥¥Ńļ
łŎ ¥¥ĹļĸĸŦ«
¥¥ŃĽ łŎ ¥¥ĹĽĸĸŦ«
¥¥Ńľ
łŎ ¥¥ĹĿĹĸŦ«
¥¥ŃĿ
ŇŎ ¥Łĸ©ĹĸŎ«
¥¥Ńŀ
ŇŎ ¥Łĸ©ĹĸŎ«
¥¥ŃĹ
łŎ ¥¥¥ĽĺĸŦ«
9
Enter the setting.
The Audio Input Setup Menu reappears.
10
Select “Exit” and press the ENTER button at the
Audio Input Setup Menu screen.
The System Setup Menu reappears.
CH SEL
ENTER
(Main unit) (Remote control unit)
(Main unit)
CH SEL
ENTER
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
¥¥¥
¥¥Ĺ©ŅŤŢŤůŜŧ¥Ŋũ¥łŮŮŤŢũ
¥¥ĺ©ņřŕ©Ŋŏ¥ŔŠůŰū
¥¥Ļ©ŊũūŰů¥ŇŰũŞůŤŪũ¥ōŠű©
¥¥ļ©ŇŰũŞůŤŪũ¥œŠũŜŨŠ
¥¥Ľ©ŊņņņĹĻŁļ¥łŮŮŤŢũ
¥¥ľ©ŊņņņĹĻŁļ¥łŰůŪ¥ŇŰũŞ©
¥¥Ŀ©ŕŰũŠŭ¥őŭŠŮŠůŮ
¥¥ņųŤů
¥Ļ©łŰşŤŪ¥ŊũūŰů¥ŔŠůŰū
Exit
*Audio In Setup
¥¥ĻáĿ©őŭŠŮŠů¥ŏŜŨŠ
¥
¥
¥¥łĹ
ŇŎ ¥ŀĿ©ĽĸŎ«¥ŘŎŋřáŇŎ
¥
¥
¥
¥
¥¥¥¥¥¥¥¥ŚŠŮ
¥
&GHCWNV
Rename Clear
Name A1
¥¥ĻáĿ©őŭŠŮŠů¥ŏŜŨŠ
¥
¥
¥¥łĹ ŇŎ ¥ŀĿ©ĽĸŎ«¥ŘŎŋřáŇŎ
¥
¥
¥
¥
¥¥¥¥¥¥¥¥ŚŠŮ
¥
&GHCWNV
Default : Yes
Name A1