Denon AVR-5805 User Manual

164
Zone2 tone control setting
• This function allows you to adjust the bass and treble of the Zone2 audio output
during surround playback in Zone2 to suit your tastes.
2
Press the SURROUND PARAMETER button.
Display the Surround Parameter Menu on the Zone2
monitor out.
The screen for the selected surround mode
appears.
1
3~6
2,8
7,8
1
Select the ZONE2 mode using the AMP/Z2 button.
(Remote control unit)
¥¥¥¥¥¥¥¥¥¥¥¥œŐŐŎ¥ŔŊśņ
¥¥¥¥¥¥¥¥¥¥¥¥¥ŨŠşŤŰŨ
¥¥¥¥¥¥¥¥¥¥¥¥ņŇŇņńŕ¥Ĺĸ
¥
¥
¥¥¥¥¥¥¥¥¥¥¥¥ŕŐŏņ
¥¥¥¥¥¥¥¥¥¥¥¥ŔŃ¥ńʼn¥ŐŖŕ
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥«
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŚŠŮ
¥œŐńŌ¥łœņŏł
10
1((
&GHCWNV
3
Select “TONE”.
CH SEL
ENTER
(Remote control unit)
¥¥¥¥¥¥¥¥¥¥¥¥œŐŐŎ¥ŔŊśņ
¥¥¥¥¥¥¥¥¥¥¥¥¥ŨŠşŤŰŨ
¥¥¥¥¥¥¥¥¥¥¥¥ņŇŇņńŕ¥Ĺĸ
¥
¥
¥¥¥¥¥¥¥¥¥¥¥¥ŕŐŏņ
¥¥¥¥¥¥¥¥¥¥¥¥ŔŃ¥ńʼn¥ŐŖŕ
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥«
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŚŠŮ
¥œŐńŌ¥łœņŏł
10
1((
&GHCWNV
4
Display the Tone Control screen.
CH SEL
ENTER
(Remote control unit)
5
Display the Tone Control screen.
Select Tone Defeat OFF.
If you do not want to the tone to be adjusted, set “Tone Defeat” to
“ON”.
CH SEL
ENTER
(Remote control unit)
¥¥¥¥ŕŪũŠ¥ńŪũůŭŪŧ
¥¥¥¥ŕŪũŠ¥ŅŠšŠŜů¥¥¥¥«
¥¥¥¥ŃŜŮŮ¥¥¥¥¥¥¥¥¥¥àľ
şŃ
¥¥¥¥ŕŭŠŝŧŠ¥¥¥¥¥¥¥¥àļ şŃ
¥
¥
¥
¥
¥
¥
10
1((
6
q Select Bass or Treble.
CH SEL
ENTER
(Remote control unit)
w Select the level.
CH SEL
ENTER
(Remote control unit)
(Remote control unit)
7
Enter the setting.
The Surround Parameter Menu screen re-appears.
CH SEL
ENTER
(Remote control unit)

Denon AVR-5805 Specifications

General

Brand	Denon
Model	AVR-5805
Category	Receiver
Language	English