137
THX Surround EX / Home THX Cinema mode
When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played:
q THX Surround EX (THX Ultra2 Cinema)
w Home THX CINEMA
e THX 5.1
r THX DSCRT 6.1, THX MTRX 6.1
When the HOME THX CINEMA mode is set when a DVD is played, check the DVD player’s digital output setting and change the setting to one
for which Dolby Digital and DTS bit stream signals can be output (“bit stream”, for example).
[1] Playing sources recorded in Dolby Surround in the Home THX
Cinema surround mode
1
q Select the input source.
w Set the input mode to “AUTO”.
2
Select the Home THX Cinema mode.
3
Play a program source with the mark.
• For operating instructions, refer to the manuals of the
respective components.
4
Adjust volume.
5
Display the Surround Parameter Menu and set the parameters
according to the source.
¥
¥¥¥¥¥¥¥¥¥¥¥¥¥ŅņńŐŅņœ
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥őō
IIų¥ń
¥¥¥¥¥¥¥¥¥¥¥¥¥ŎŐŅņ
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŔŃ¥Őŏ
¥
¥
¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŚŠŮ
¥őō
IIų¥ń¥à¥ŕʼnř
&GHCWNV
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit) (Remote control unit)
To Next Page
Loading...
