69
4
Press the Cursor left and right buttons.
The screen switches to the character input screen.
[3] Preset Name
It is possible to input station names , etc., for preset channels. These names are displayed on the front display and on the on-screen display.
¥ĻáĿ©őŭŠŮŠů¥ŏŜŨŠ
¥¥ŃŧŪŞŦ¥¥¥ł
¥¥łĺ
ŇŎ
¥ŀŁ©ĹĸŎ«
¥¥łĻ
ŇŎ
¥Łŀ©ĹĸŎ«
¥¥łļ
ŇŎ
ĹĸĿ©ŁĸŎ«
¥¥łĽ
ŇŎ
¥Łĸ©ĹĸŎ«
¥¥łľ
ŇŎ
¥Łĸ©ĹĸŎ«
¥¥łĿ
ŇŎ
¥Łĸ©ĹĸŎ«
¥¥łŀ
ŇŎ
¥Łĸ©ĹĸŎ«
¥¥łĹ
ŇŎ
¥ŀĿ©ĽĸŎ«
 A1FM 87.50MHz
*Preset Name
1
Select “Preset Name” at the Tuner Presets screen.
¥¥¥
¥¥¥łŰůŪ¥őŭŠŮŠů¥ŎŠŨŪŭŴ
¥
¥¥¥őŭŠŮŠů¥ŔŦŤū
¥
¥¥¥őŭŠŮŠů¥ŏŜŨŠ
¥
¥
¥¥¥ņųŤů
¥ĻáĿ©ŕŰũŠŭ¥őŭŠŮŠůŮ
Preset Name
*Tuner Presets
2
Switch to the Preset Name screen.
3
Select the preset channel whose name you want to change.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
¥¥ĻáĿ©őŭŠŮŠů¥ŏŜŨŠ
¥
¥
¥¥łĹ
ŇŎ
¥ŀĿ©ĽĸŎ«
¥
¥
¥
¥
¥¥¥¥¥¥¥¥ŚŠŮ
¥
&GHCWNV
5
q Move the cursor to choose the position at which you want to
input the character using the Cursor left and right buttons.
w Select the character to be input using the Cursor up and down
buttons.
Up to 8 characters can be input.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
Example: When “A1” is selected and the
Cursor left and right buttons are
pressed
A B C D E F G H I J  K L M N O P Q R S T U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x y z
0 1 2 3 4 5 6 7 8 9
!  “ #  % & ‘ ( ) 
*
+ , – . / : ; < = > ? @ [ \ ] (space)