150
5
q Select Bass or Treble.
(Remote control unit)
w Set the level.
(Remote control unit)
6
Enter the setting.
The Surround Parameter Menu screen re-appears.
7
Press the ENTER or SURROUND PARAMETER button to complete the setting.
(Remote control unit)
or
(Remote control unit)
1
The tone switches as follows each time the TONE CONTROL button is pressed.
[2]
Adjusting the tone from the Main unit
(Main unit)
2
Select with the name of the volume to be adjusted and adjust the level.
• To increase the bass or treble:
The bass or treble sound can be increased to up to +6 dB in steps of 1 dB.
• To decrease the bass or treble:
The bass or treble sound can be decreased up to –6 dB in steps of 1 dB.
(Main unit)
BASS (ALL)
F-TREBLE (front)
TREBLE (ALL)
F-BASS (front)
C-BASS (center)
SA-BASS (surround A)
C-TREBLE (center)
S B-TREBLE (surround B)
SA-TREBLE (surround A)
S B-BASS (surround B)
SW-BASS (subwoofer)
SB-BASS (surround back)
SB-TREBLE (surround back)
3
If you do not want the bass and treble to be adjusted, turn on the tone defeat mode.
The signals do not pass through the bass and treble adjustment circuits, providing higher quality sound.
(Main unit)
To Next Page
Loading...
Need help?
General
