Denon AVR-5805 - Preset Memory

167
1
Use the “Auto tuning” or “Manual tuning” operation to tune
in the station to be preset in the memory.
3
Press the MEMORY button.
4
Press the memory block (A to G)
button.
5
Press the CHANNEL + (UP) or –
(DOWN) button to select the desired
preset channel (1 to 8).
6
Press the MEMORY button again to store the station in the
preset memory.
To preset other channels, repeat steps 2 to 5.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
Preset memory
RC-995
5
3,6
2
4
(Remote control unit)
(Remote control unit)
(Remote control unit)(Main unit)
(Remote control unit)(Main unit)
3,6
2
Select the TUNER mode using the
TUN/D-TU button.
(Remote control unit)
(Remote control unit)
The memory block can also be
selected by pressing the SHIFT
button.