To Next Page

To Previous Page

3-3. Setting the Input Function Level

• Correct the playback level of the different input sources.

• Adjust the playback levels of the devices connected to the different input sources to the same level to eliminate the need for adjusting the main

volume each time the input source is switched.

¥¥¥

¥¥Ĺ©ŅŤŢŤůŜŧ¥Ŋũ¥łŮŮŤŢũ

¥¥ĺ©ņřŕ©Ŋŏ¥ŔŠůŰū

¥¥Ļ©ŊũūŰů¥ŇŰũŞůŤŪũ¥ōŠű©

¥¥ļ©ŇŰũŞůŤŪũ¥œŠũŜŨŠ

¥¥Ľ©ŊņņņĹĻŁļ¥łŮŮŤŢũ

¥¥ľ©ŊņņņĹĻŁļ¥łŰůŪ¥ŇŰũŞ©

¥¥Ŀ©ŕŰũŠŭ¥őŭŠŮŠůŮ

¥¥ņųŤů

¥Ļ©łŰşŤŪ¥ŊũūŰů¥ŔŠůŰū

¥ĻáĻ©ŊũūŰů¥ŇŰũŞůŤŪũ¥ōŠű©

¥¥¥¥¥«¥¥¥ĸşŃ¥¥¥¥«¥¥¥ĸşŃ

¥¥¥¥¥«¥¥¥ĸşŃ

¥¥¥¥¥¥¥¥¥¥¥¥¥ŅŠšŜŰŧů

;G U

6WPGT &$5

8%4

8%4

8%4

8%4

8#WZ

2JQPQ

6CRG

&8&

8&2

Select “Input Function Lev.” at the Audio Input

Setup Menu.

Display the Input Function Lev. screen.

Input Func.Lev.

*Audio In Setup

TUNER : 0dB

*Input Func.Lev

q Select the input source. w Adjust the level.

The level can be adjusted between –12 dB and +12 dB in units

of 1 dB.

If “Yes” is selected for “Default”, the settings are automatically

reset to the default values.

Enter the setting.

The Audio Input Setup Menu reappears.

After completing this setting, check that the playback levels for the different sources are the same.

CH SEL

ENTER