Denon AVR-5805 - Setting the Crossover Frequency Individually for the Different Channels

54
2 Setting the crossover frequency individually for the different channels
1
Select “Advanced” at the Crossover Frequency
screen.
¥ĺἩńŭŪŮŮŪűŠŭ¥ŇŭŠŬŰŠũŞŴ
¥
¥
¥¥ŇŭŪũů¥¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ńŠũůŠŭ¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥ł¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥Ń¥¥¥¥«¥¥ŀĸ
¥¥Ŕ©ŃŜŞŦ¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ōŇņ¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŀĸ
¥¥¥¥¥¥¥¥łşűŜũŞŠş
5OCNN
5OCNN
5OCNN
5OCNN
5OCNN
Advanced
*Crossover Freq
2
Select the speaker to be set.
¥ĺἩńŭŪŮŮŪűŠŭ¥ŇŭŠŬŰŠũŞŴ
¥
¥
¥¥ŇŭŪũů¥¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ńŠũůŠŭ¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥ł¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥Ń¥¥¥¥«¥¥ŀĸ
¥¥Ŕ©ŃŜŞŦ¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ōŇņ¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŀĸ
¥¥¥¥¥¥¥¥łşűŜũŞŠş
5OCNN
5OCNN
5OCNN
5OCNN
5OCNN
Front : 80Hz
*Crossover Freq
3
Select the frequency.
¥ĺἩńŭŪŮŮŪűŠŭ¥ŇŭŠŬŰŠũŞŴ
¥
¥
¥¥ŇŭŪũů¥¥¥¥¥¥¥¥¥«¥Ĺĸĸ
¥¥ńŠũůŠŭ¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥ł¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥Ń¥¥¥¥«¥¥ŀĸ
¥¥Ŕ©ŃŜŞŦ¥¥¥¥¥¥¥¥«¥¥ŀĸ
¥¥ōŇņ¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŀĸ
¥¥¥¥¥¥¥¥łşűŜũŞŠş
5OCNN
5OCNN
5OCNN
5OCNN
5OCNN
Front : 100Hz
*Crossover Freq
NOTES:
• If “LFE–THX–” is selected at “2-2. Subwoofer Setup”, the frequencies can only be selected
for speakers set to “Small” at “2-1. Speaker Configuration”.
¥ĺἩńŭŪŮŮŪűŠŭ¥ŇŭŠŬŰŠũŞŴ
¥
¥
¥¥ŇŭŪũů¥¥¥¥¥¥¥¥¥«
¥¥ńŠũůŠŭ¥¥¥¥¥¥¥¥«¥¥ļĸ
¥¥ŔŰŭŭŪŰũş¥ł¥¥¥¥«¥¥ŀĸ
¥¥ŔŰŭŭŪŰũş¥Ń¥¥¥¥«
¥¥Ŕ©ŃŜŞŦ¥¥¥¥¥¥¥¥«¥Ĺĺĸ
¥¥ōŇņ¥¥¥¥¥¥¥¥¥¥¥¥¥¥ŀĸ
¥¥¥¥¥¥¥¥łşűŜũŞŠş
.CTIG
5OCNN
5OCNN
0QPG
5OCNN
• If “LFE+Main” is set at “2-2. Subwoofer Setup”, the frequencies can be selected regardless of the speaker size setting.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)