Denon AVR-5805 - Setting the Dolby Digital Setup

80
5-2. Setting the Dolby Digital Setup
Sets the down-mixing method when not using a center speaker or surround speakers.
OFF: The dynamic range is not compressed.
ON: The dynamic range is compressed automatically according to the combination of speakers being used.
1
Select “Dolby Digital Setup” at the Advanced
Playback Menu.
¥¥¥
¥¥Ĺ©ĺŞţ¥ŅŤŭŠŞůÃŔůŠŭŠŪ
¥¥ĺ©ŅŪŧŝŴ¥ŅŤŢŤůŜŧ¥ŔŠůŰū
¥¥Ļ©łŰůŪ¥ŔŰŭŭŪŰũş¥ŎŪşŠ
¥¥ļ©ŎŜũŰŜŧ¥ņŒ¥ŔŠůŰū
¥
¥
¥
¥
¥¥ņųŤů
¥Ľ©łşűŜũŞŠş¥őŧŜŴŝŜŞŦ
3
Select “ON” if you want to use the Compression, “OFF” if you do not want to use it.
¥¥¥¥ŅŪŲũŨŤų¥ŐūůŤŪũ¥ŔŠůŰū
¥
¥
¥¥¥¥¥¥ńŪŨūŭŠŮŮŤŪũ
¥
¥¥¥¥¥¥¥¥¥¥¥«
¥
¥
¥
Ľáĺ©ŅŪŧŝŴ¥ŅŤŢŤůŜŧ
10
1((
4
Enter the setting.
The Advanced Playback Menu reappears.
NOTE:
When a center speaker or surround speakers are not connected, the sounds in those channels
are directed to the front speakers.
Dolby D Setup
*Advanced Play
Comp. : OFF
*Dolby D Setup
2
Press the ENTER button.
Display the Dolby Digital Setup screen.
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
CH SEL
ENTER
(Main unit) (Remote control unit)
Set “Compression” to “ON” if it seems that sound is distorted because the input level
exceeds the allowable input for the front speakers.