166
Manual tuning
1
Set the input source to “TUNER”.
3
Watching the display, press the BAND button to select the
desired band (AM or FM).
4
Press the MODE button to set the manual tuning mode.
Check that the display’s “AUTO” indicator turns off.
5
Press the TUNING + or – button to tune in the desired station.
The frequency changes continuously
when the button is held
in.
(Remote control unit)(Main unit)
(Remote control unit)(Main unit)
(Remote control unit)(Main unit)
(Remote control unit)(Main unit)
NOTES:
• When in the auto tuning mode on the FM band, the “STEREO”
indicator lights on the display when a stereo broadcast is tuned
in. At open frequencies, the noise is muted and the “TUNED”
and “STEREO” indicators turn off.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the “STEREO” indicator turns off.
2
Select the TUNER mode using the
TUN/D-TU button.
(Remote control unit)
To Next Page
Loading...
Need help?
General
