55
4
Enter the setting.
The Speaker Setup Menu reappears.
For the “WIDE SCREEN” and “9CH STEREO” DSP simulation modes, the surround speakers can be set separately.
See pages 60, 61 for setting the surround speaker when the “Analog” mode is selected at “3-2. EXT.IN Setup”.
2-6. Selecting the Surround Speakers for the different surround modes
• This Menu is displayed when both surround speakers A and B are used.
• At this screen preset the surround speakers to be used in each surround modes.
ĺáľ©ŔŰŭŭŪŰũş¥Ŕū¥ŔŠůŰū
¥
¥ŕʼnřÃŅŐōŃŚÃŅŕŔ
¥¥ńŊŏņŎł¥¥¥¥¥¥¥¥¥ł¥Ń¥łàŃ
¥ŎŖōŕŊ¥ńʼn¥ŎŐŅņ¥¥¥ł¥Ń¥łàŃ
¥¥ŎŖŔŊń¥¥¥¥¥¥¥¥¥¥ł¥Ń¥łàŃ
¥¥ňłŎņ¥¥¥¥¥¥¥¥¥¥¥ł¥Ń¥łàŃ
¥ŘŊŅņ¥Ŕńœņņŏ¥¥¥¥¥ł¥Ń¥łàŃ
¥Łńʼn¥ŔŕņœņŐ¥¥¥¥¥¥ł¥Ń¥łàŃ
¥ŅŔő¥ŔŊŎŖōłŕŊŐŏ¥¥ł¥Ń¥łàŃ
3
q To select the surround mode
w To select the surround speaker
A:When surround speakers A is used.
B:When surround speakers B is used.
A+B : When both surround speakers A and B are used.
1
Select “Surround Sp Setup” at the Speaker Setup
Menu.
¥¥¥
¥¥Ĺ©ŔūŠŜŦŠŭ¥ńŪũšŤŢ©
¥¥ĺ©ŔŰŝŲŪŪšŠŭ¥ŔŠůŰū
¥¥Ļ©ŅŠŧŜŴ¥ŕŤŨŠ
¥¥ļ©ńţŜũũŠŧ¥ōŠűŠŧ
¥¥Ľ©ńŭŪŮŮŪűŠŭ¥ŇŭŠŬŰŠũŞŴ
¥¥ľ©ŔŰŭŭŪŰũş¥Ŕū¥ŔŠůŰū
¥¥Ŀ©ŕʼnř¥łŰşŤŪ¥ŔŠůŰū
¥¥ņųŤů
¥ĺ©ŔūŠŜŦŠŭ¥ŔŠůŰū
Surr Sp Setup
*Speaker Setup
2
Display the Surround Sp Setup screen.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
About
Speaker type setting when using both surround speakers A and B
• If “Small” is set for either surround speakers A or B, the output is the same as when “Small” is set for both A and B.
To Next Page
Loading...
Need help?
General
