132
[8] Selection of resolution setting (SCALE)
1
The resolution switches as follows each time the SCALE
button is pressed.
(Remote control unit)
(Main unit)
Multi-source recording/playback
[1] Playing one source while recording another (REC OUT mode)
1
Press the ZONE3/4/REC SELECT button
until “ZONE3 SOURCE” appears on the
display.
2
With “ZONE3 SOURCE”displayed, turn
the FUNCTION knob until “RECOUT
SOURCE” appears on the display.
With “RECOUT SOURCE” displayed,
turn the FUNCTION knob to select the
source you wish to record.
• The “REC” indicator lights.
3
Set the recording mode.
• For operating instructions, refer to the manual of the
component on which you want to record.
4
To cancel, turn the function knob and
select “SOURCE”.
NOTES:
• Recording sources other than digital inputs selected in the REC
OUT mode are also output to the Zone3 audio/video output
jacks.
• When the REC OUT mode is selected, the Zone3 button on the
Remote control unit cannot be operated.
(Main unit)
(Main unit)
(Main unit)
480i/576i 480p/576p 1080i 720p
See page 73 for descriptions of the different resolution
settings.
To Next Page
Loading...
Need help?
General
