Deprag AST11-1 - 16 REQUIRED ACCESSORIES; 16.1 Power Cable; 17 OPTIONAL EQUIPMENT; 17.1 Motor Cable for MICROMAT-E

106
16 Required accessories
All catalogs are available for download from our web site: www.deprag.com
16.1 Power Cable
Designation Part no.
Power cable KN AST11-EU – 1.8m / 5.9 ft. 385443 A
Power cable KN AST11-US – 1.8m / 5.9 ft. 385443 B
Power cable KN AST11-CN – 2.5 m / 8.2 ft. 385443 C
17 Optional Equipment
17.1 Motor Cable for MICROMAT®-E
Connect MICROMAT-E screwdriver with sequence controller AST11.
Designation Part no.
Length 2.5 m / 8.2 ft., straight connection 385442 A
Length 5 m / 16.4 ft., straight connection 385442 B
Length 8 m, / 26.2 ft. straight connection 385442 C
Length 12 m / 39.4 ft., straight connection 385442 D
Length 2.5 m / 8.2 ft., angle connection 90° 385442 A
Length 5 m / 16.4 ft., angle connection 90° 385442 B
Length 8 m, / 26.2 ft., angle connection 90° 385442 C
Length 12 m / 39.4 ft., angle connection 90° 385442 D
17.2 Extension for MICROMAT-E Motor Cable
Extension for MICROMAT®-E motor cable, with those the motor cable is firmly connected
with the screwdriver.
Designation Part no.
Length 2.5 m / 8.2 ft. 385478 A
Length 5.5 m / 18.0 ft. 385478 B
Length 9.5 m / 31.2 ft. 385478 C
17.3 Plug
Designation Part no.
Plug RJ45 – IP54 385453 A