97
13 Maintenance and servicing
Incorrect disassembly or assembly can lead to injury of an operator and damage of the ma-
chine. Dis assembly and assemb ly work may only be c arr ied o ut by DEPRAG or qualifi ed
personnel.
Recommendations should help to uphold warranty claims.
Keep the device in a dry place. Precipit at ion, dampness and all types of f luids or wet
conditions may contain minerals which corrode electric circuitry.
Do not keep or use the device in dusty or dirty surroundings. The moveable parts and
electronic components could be damaged.
Do not keep the device in hot conditions. High temperatures can shorten the life of
electric devices and deform or melt certain plastics.
Do not keep the device in cold conditions. Internal dampness can build up and damage
the electric circuitry when the device then is moved to normal temperature conditions.
Do not try to open the device in any other way than in the instructions.
Do not let the device fall, be hit or bumped and do not shake it. Rough handling can
damage electronic circuitry and mechanical parts.
Do not use any harsh chemicals, cleaning solvents or strong cleaning agents to clean
the device.
Do not paint the device. Paint could stick together moveable parts and prevent correct
operation of the device.
WARNING
To avoid damage to surface finish, avoid using chlorine bleach, chlorine
based cleaners, abrasive substances, ammonia, rags or cleaning pads
containing metallic particles!
Use adequate cleaning agent!
Unauthorised alterations or additions can dama
e the device and violate s
ecif ications.
To Next Page
Loading...
Need help?
General
