64
8.3.4.13 Setup Extensions
On this page you are able to activate options of the AST11.
Figure 36: Activating options
Different options are available, at extra cost, for the sequence controller AST11 (also refer
to 17.10 Optional software packages).
To activate these options please contact the DEPRAG sales department or your DEPRAG
dealer.
In order to be able to perform the activation, some information is required which must be
contained in your order:
◦ Activation key of the respective option
◦ Serial number of the sequence controller
The activation key can be found to the right, next to the respective option. The key can
either be directly copied and inserted in an email or saved by clicking the file.
You will receive a license file for the activation, which contains the respective activation
key. The activation key can be entered directly on the bottom of the page or by clicking the
button "load key".
As an alternative, the license data can be also directly loaded. To do this, click on the but-
ton "search....." and select the respective file. Click "load license data".
Once the activation key is loaded, the option is displayed as released and can now be
used.
8.3.4.14 Screwdriving sequence
You may display, create and edit screwdriver operations on this page.
Making changes is possible only if the correct password has been entered at the time of
login, otherwise the information is merely displayed.
To Next Page
Loading...
Need help?
General
