9
2 Safety instructions
Reading the enclosed safety instruction booklet no. 016000 (pink-coloured booklet) is
essential for working with the equipment.
WARNING
Fires, electric shocks and other injuries, or damages to components can be
caused if the safety guidelines are ignored.
WARNING
Risk of fatal injury due to electrocution!
Disconnect the electric equipment from the power supply before starting
any work on the tool (e.g. installation, changing of accessories or machine
tools, removal of covers prior to longer downtimes, maintenance works,
etc.).
Switch off the mains switch and pull out the mains plug!
3 Intended use
The sequence controller AST11 is designed exclusively for fittings in industrial use.
And must only be operated with DEPRAG MICROMAT–EC screwdrivers and
DEPRAG MINIMAT–EC screwdrivers (stationary and handheld) of the series 320Exx19,
320Exx22, 320Exx27 and 320Exx36.
The system is especially suitable for application requiring the highest demand of quality,
flexibility and documentation.
Use beyond its intended use is considered unauthorized and therefore improper. Further-
more, DEPRAG is not liable for damage resulting from the misuse of the instrument; the
user alone is liable.
The correct use of the instrument includes compliance with all operating, maintenance and
repair instructions.
IMPORTANT
Please contact your DEPRAG Representative, our international service
centers or contact DEPRAG SCHULZ GMBH u. CO. directly if you have
any questions.
Visit our website at www.deprag.com
.
To Next Page
Loading...
Need help?
General
