Deprag AST11-1 User Manual

95
screwdriver Screwdriver type Value 311E27-0020
calibration Calibration value Value 1,000
StatAngleAv
Statistics Angle Mean
Value
Value unit 1081 °
StatAngleStddev%
Statistics Angle Stan-
dard Deviation %
Value unit 1.36 %
StatAngleStddevAbs
Statistics Angle Stan-
dard Deviation Abso-
lute
Value unit 14.70
StatAngleCPK Statistics Angle CPK Value 2.16
StatAngleCP Statistics Angle CP Value 2.03
StatAngleCPKmin
Statistics Angle CPK
Lower Limit
Value unit 1000 °
StatAngleCPKmax
Statistics Angle CPK
Upper Limit
Value unit 1150 °
StatAngleNum
Statistics Angle Num-
ber Values
Value 96
StatTorqueAv
Statistics Torque Mean
Value
Value unit 0,213 Nm
StatTorqueStddev%
Statistics Torque Stan-
dard Deviation %
Value 1,7 %
StatTorqueStddevAbs
Statistics Torque Stan-
dard Deviation abs.
Value unit 0,020 Nm
StatTorqueCPK Statistics Torque CPK Value 1,77
StatTorqueCP Statistics Torque CP Value 2,12
StatTorqueCPKmin
Statistics Torque CMK
Lower Limit
Value unit 0,000 Nm
StatTorqueCPKmax
Statistics Torque CMK
Upper Limit
Value unit 0,350 Nm
StatTorqueNum
Statistics Torque Num-
ber Values
Value 100
fcerrornum
Status / Error Number
F-Function
Value 1
fcerrortext
Status / Error Text F-
Function
Error text TOO SHORT
fcpartnum Counter F-Function Value 1/5
screwcounter
Number of cycles since
sequence controller
has started
Value 1236
title Program Title Text Standard 1
Table 26: Print parameters
IMPORTANT
Statistical values can only be printed if the command "Statistics" is
inserted ahead of the print command in the screwdriving process.

Deprag AST11-1 Specifications

General

Brand	Deprag
Model	AST11-1
Category	Controller
Language	English