C-2
95-8533
18.2
PERFORMANCE TESTING TO EN 60079-29-1: 2007 AND EN 60079-29-4: 2010
The measuring function of the EQ3XXX Controller, according to Annex II paragraph 1.5.5, 1.5.6
and 1.5.7 of the Directive 94/9/EC, was covered in this Type Examination Certificate in the following
configurations:
4. Controller Model EQ3XXX with EQ3710AIM or EQ3700DCIO or EQ3730EDIO or EQ22XXDCU
(tested as a stand-alone control unit with a calibrated linear 4-20mA simulator input signal or
relay contacts (as applicable).
5. Controller Model EQ3XXX with CTB and PIRECL (tested as a gas detection system with methane
applied to the PIRECL).
6. Controller Model EQ3XXX with UD10/DCU Emulator and CGS Conditioning Board, in
combination with the Det-Tronics gas sensor Model CGS (tested as a gas detection system
with methane applied to the CGS).
7. Controller Model EQ3XXX with OPECL or LS2000.
FOR THE ATEX CERTIFIED EAGLE QUANTUM PREMIER SYSTEM FIELD DEVICES
EQ22XXDCU AND EQ22XXDCUEX, THE FOLLOWING SPECIAL CONDITION FOR SAFE
USE APPLIES:
The field devices EQ22XXDCU and EQ22XXDCUEX have an ambient temperature rating for
performance of –40°C to +75°C.
IMPORTANT NOTE
All applied gas detectors must be ATEX certied to EN60079-29-1/-4 and the conguration
must comply with the gas performance parameters stated in the Installation Manual.