Det-Tronics Eagle Quantum Premier - EQ3900 RPS Explosion-Proof Power Supply; LS2000 Line-Of-Sight; PIRECL Pointwatch Eclipse

95-8533
2-17
18.2
PIRECL PointWatch Eclipse
The Pointwatch Eclipse® Model PIRECL
is a diffusion-based, point-type infrared
gas detector that provides continuous
monitoring of combustible hydrocarbon gas
concentrations in the range of 0–100% LFL.
The LON supervision meets Signaling Line
Circuit (Class X) requirements per NFPA72:
2010 for the Model PIRECL.
For PIRECL installation, operation,
maintenance, specifications and ordering
information, refer to form number 95-8526 .
NOTE
The low alarm range for the EQP
PIRECL is 5–40% LFL (the standard
PIRECL is 5–60% LFL).
For information regarding USCG Approval of
the PIRECL Detector, refer to Appendix D.
LS2000 Line-of-Sight
The FlexSight™ Line-of-Sight Infrared
Hydrocarbon Gas Detector Model LS2000 is a
gas detection system that provides continuous
monitoring of combustible hydrocarbon gas
concentrations in the range of 0–5 LFL-meters,
over a distance of 5–120 meters.
The LON supervision meets Signaling Line
Circuit (Class X) requirements per NFPA72:
2010 for the Model LS2000.
For LS2000 installation, operation,
maintenance, specifications, and ordering
information, refer to form number 95-8714.
EQ3900 Series Fire and Gas Alarm
Control Panel and Pre-Action System
Solutions
As part of providing the total solution to
commercial and industrial customers globally,
Det-Tronics offers several performance
approved hazardous area (EQ3900N
and EQ3900E) and non-hazardous area
(EQ3900G) enclosure solutions. These are
custom solutions that can include 1 or more
of the following components: EQP controller,
EDIO, AIM, RM, DCIO, PSM, and GFM. Refer
to Instruction Manuals (95-8559 and 95-8641)
for additional information.
EQ3900RPS Explosion-Proof Power
Supply
The EQ3900RPS is an industrial power supply
that accepts two independent AC inputs and
produces 24 Vdc with up to 18 amps output
current. It can be configured with various
numbers of 24 Vdc power outputs, ground
fault test operator, status indicators, fuse
monitoring and window. It is intended for use
in Class 1 Division 1 locations.