Det-Tronics Eagle Quantum Premier - Page 132

D-2
95-8533
18.2
Equip.
No.
Manufacturer Equipment type Series/Model Description
13 Det-Tronics
UD10 Universal
Display
UD10A (S) 5N (5M) 25 (28) W 2
14 Det-Tronics
X3301
Multispectrum
Flame Detector
X3301A (S) 4N (4M) 11 (13, 14, 23) W (T) 1 (2) ;
with Q9033A Al (Q9033B SS) swivel
15 Det-Tronics
X3302
Multispectrum
Flame Detector
X3302A (S) 4N (4M) 11 (13, 14, 23) W 1 (2);
with Q9033A Al (Q9033B SS) swivel
16 Det-Tronics
STB Sensor
Termination Box
STB4 (5) A (S) 2N (2U, 3N, 5N, 6N) W
(Used with the Fenwal DAF Vertical Heat Detector)
17 Det-Tronics
EQ2220GFM
Ground Fault
Monitor
EQ2220GFM is installed in the same enclosure
with EQ3XXX Controller
18
Phoenix
Contact
(Germany)
EQP2120PS-B
Power Supply
(Discontinued)
Model Quint PS-100-240VAC/24Vdc/20;
panel mount only, installed in the same enclosure
with EQ3XXX Controller
19
Phoenix
Contact
(Germany)
EQP2120PS-B
Power Supply
(Replacement)
Model QUINT PS-1AC/24 DC/20
panel mount only, installed in the same enclosure
with EQ3XXX Controller
21
Phoenix
Contact
(Germany)
EQP2410PS-P
Converter
Model QUINT PS-24 DC/24 DC/10
panel mount only, installed in the same enclosure
with EQ3XXX Controller
22
Phoenix
Contact
(Germany)
QUINT-
DIODE/40Diode
Redundancy
Module
Model QUINT-DIODE/40; panel mount only;
installed in the same enclosure with EQ3XXX Controller
and Approved Phoenix Power Supplies
23
Kidde-Fenwal
(Fenwal)
DAF
Vertical Heat
Detector
Model 12-E27121-020-xx rated 140°F (60°C) {160°F
(71°C), 190°F (88°C), 225°F (107°C)};
used with STB Sensor Termination Box, item 15
24 Fenwal
THD-7052
Heat Detector
Uses 2-wire base 2WRLT.
25 Fenwal
CPD-7054
Ionization Type
Smoke Detector
Uses 2-wire base 2WRLT.
26 Fenwal
PSD-7157 and
PSD-7157D
Photoelectric Type
Smoke Detectors
Uses 2-wire base 2WRLT.
27 Fenwal MT-12/24-R Horn 24 Vdc model; installed in Fenwal IOB-R box.
28 Fenwal
MTWP-2475W – FR
Horn/Strobe
Multitone Weatherproof Horn-Strobe;
installed in Fenwal IOB-R box.
29 Fenwal
Manual Call
Stations Series
3300
Model 84-330001-002 pull station;
uses Fenwal SGB-32S interior surface mount backbox
(compatible mounting with B-11).
30 Fenwal
RA-911 Remote
Indicator
Remote indicator for use with Fenwal Heat
or Smoke detectors.
31 MEDC (UK)
Manual Fire Alarm
Call Point PB Range
Model PB-UL-4C-6C-4-DC-D-7-R call point
Table D-1— List of Approved Equipment (Continued)