5
Making copies
5-10 ineo 163/213
3 Press the [+] or [,] key until "AUTO" or "MANUAL" is selected.
– If "AUTO" was selected, press the [OK] key.
– If "MANUAL" was selected, press the [*] or [)] key until one of the
nine density levels is selected, and then press the [OK] key.
The main screen appears again.
4 If necessary, specify any other copy settings.
– Refer to "Before making copies" on page 4-3.
– Refer to "Advanced copy operations" on page 6-3.
5 Press the [Start] key.
DENSITY(TEXT)
MANUAL
AUTO
OK
To Next Page
Loading...
