Develop ineo 163 - Density Level; Margin Setting; Selecting the Book Binding Position (BINDING POSITION Parameter)

7
Utility mode/Copy mode parameters
7-64 ineo 163/213
Selecting the book binding position ("BINDING POSITION" parameter)
1 Display the "COPY SETTING 1" menu.
– Refer to "Displaying the "COPY SETTING 1" menu" on page 7-55.
2 Press the [+] or [,] key until "BINDING POSITION" is selected, and
then press the [OK] key.
3 Press the [+] or [,] key until "LEFT" or "RIGHT" is selected, and then
press the [OK] key.
The "COPY SETTING 1" menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
BINDING POSITION
DENSITY LEVEL
MARGIN SETTING
BINDING POSITION
RIGHT
LEFT