Develop ineo 163 - Adjusting the Margin Width (MARGIN SETTING Parameter)

Utility mode/Copy mode parameters
7
ineo 163/213 7-65
Adjusting the margin width ("MARGIN SETTING" parameter)
1 Display the "COPY SETTING 1" menu.
– Refer to "Displaying the "COPY SETTING 1" menu" on page 7-55.
2 Press the [+] or [,] key until "MARGIN SETTING" is selected, and then
press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
BINDING POSITION
DENSITY LEVEL
MARGIN SETTING