Develop ineo 163 - Changing the Display Contrast (LCD CONTRAST Parameter)

Utility mode/Copy mode parameters
7
ineo 163/213 7-15
Changing the display contrast ("LCD CONTRAST" parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "LCD CONTRAST" is selected, and then
press the [OK] key.
3 Press the [*] or [)] key until the desired contrast is selected, and then
press the [OK] key.
The "MACHINE SETTING" menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
KEY SPEED SETTING
LCD CONTRAST
LANGUAGE
LCD CONTRAST
OK