Develop ineo 163 - Specifying Settings for the Paper Loaded into the 1 St Paper Drawer (TRAY1 PAPER Parameter)

Utility mode/Copy mode parameters
7
ineo 163/213 7-23
Specifying settings for the paper loaded into the 1st paper drawer
("TRAY1 PAPER" parameter)
1 Display the "PAPER SOURCE SETUP" menu.
– Refer to "Displaying the "PAPER SOURCE SETUP" menu" on
page 7-20.
2 Press the [+] or [,] key until "TRAY1 PAPER" is selected, and then
press the [OK] key.
– To specify the paper size, continue with step 3.
– To select the paper type, continue with step 5.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
TRAY1 PAPER
INCH/METRIC
PAPER TYPE