7
Utility mode/Copy mode parameters
7-58 ineo 163/213
Selecting the default image quality ("QUALITY PRIORITY" parameter)
1 Display the "COPY SETTING 1" menu.
– Refer to "Displaying the "COPY SETTING 1" menu" on page 7-55.
2 Press the [+] or [,] key until "QUALITY PRIORITY" is selected, and
then press the [OK] key.
3 Press the [+] or [,] key until the desired default image quality is
selected, and then press the [OK] key.
The "COPY SETTING 1" menu appears again.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
QUALITY PRIORITY
PAPER PRIORITY
DENSITY PRIORITY
QUALITY PRIORITY
TEXT
TEXT/PHOTO
PHOTO
To Next Page
Loading...
