Develop ineo 163 - Displaying the COPY SETTING 2 Menu

Utility mode/Copy mode parameters
7
ineo 163/213 7-71
Displaying the "COPY SETTING 2" menu
1 Press the [Utility] key.
The "UTILITY MODE" menu appears.
2 Press the [+] or [,] key until "COPY SETTING 2" is selected, and then
press the [OK] key.
The "COPY SETTING 2" menu appears.
3 Press the [+] or [,] key until the desired COPY SETTING 2 parameter
is selected, and then press the [OK] key.
– The following COPY SETTING 1 parameters are available.
COPY PRIORITY
OUTPUT PRIORITY
4IN1 COPY ORDER
MIXED ORIGINAL
DUPLEX COPY
CRISSCROSS MODE
UTILITY MODE
RETURN
COPY SETTING 2