7
Utility mode/Copy mode parameters
7-16 ineo 163/213
Changing the key repeating settings ("KEY SPEED SETTING"
parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "KEY SPEED SETTING" is selected, and
then press the [OK] key.
– To specify the setting for "TIME TO START", continue with step 3.
– To specify the setting for "INTERVAL", continue with step 5.
3 Press the [+] or [,] key until "TIME TO START" is selected, and then
press the [OK] key.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
KEY SPEED SETTING
LCD CONTRAST
LANGUAGE
KEY SPEED SETTING
INTERVAL
TIME TO START
RETURN
To Next Page
Loading...
