Develop ineo 163 - Selecting the Default Paper Drawer (PAPER PRIORITY Parameter); Paper Priority

7
Utility mode/Copy mode parameters
7-56 ineo 163/213
Selecting the default paper drawer ("PAPER PRIORITY" parameter)
1 Display the "COPY SETTING 1" menu.
– Refer to "Displaying the "COPY SETTING 1" menu" on page 7-55.
2 Press the [+] or [,] key until "PAPER PRIORITY" is selected, and then
press the [OK] key.
3 Press the [+] or [,] key until the desired default paper drawer is
selected, and then press the [OK] key.
UTILITY MODE
ADMIN. MANAGEMENT
USER MANAGEMENT
COPY SETTING 1
COPY SETTING 1
QUALITY PRIORITY
PAPER PRIORITY
DENSITY PRIORITY
PAPER PRIORITY
TRAY2
TRAY1
TRAY3