Develop ineo 163 - (INCH;METRIC Parameter); Selecting the Paper Size Unit Measurement System

Utility mode/Copy mode parameters
7
ineo 163/213 7-21
Selecting the paper size unit measurement system ("INCH/METRIC"
parameter)
1 Display the "PAPER SOURCE SETUP" menu.
– Refer to "Displaying the "PAPER SOURCE SETUP" menu" on
page 7-20.
2 Press the [+] or [,] key until "INCH/METRIC" is selected, and then
press the [OK] key.
3 Press the [+] or [,] key until the desired paper drawer is selected, and
then press the [OK] key.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
PAPER SOURCE SETUP
TRAY1 PAPER
INCH/METRIC
PAPER TYPE
INCH/METRIC
TRAY2
TRAY1
TRAY3