Develop ineo 163 - Using the Original Glass

6
Advanced copy operations
6-16 ineo 163/213
Using the original glass
1 Position the first page of the
document on the original glass.
2 Press the [Simplex/Duplex] key.
3 Press the [+] or [,] key until "1-SIDE % 2-SIDE" is selected, and then
press the [OK] key.
4 If necessary, specify any other copy settings.
– Refer to "Before making copies" on page 4-3.
– Refer to "Advanced copy operations" on page 6-3.
5 Using the keypad, type in the desired number of copies, and then press
the [Start] key.
SIMPLEX/DUPLEX
1-SIDE
1-SIDE
1-SIDE
2-SIDE
2-SIDE
1-SIDE