Develop ineo 163 - Mixed Original; Selecting the Default MIXED ORIGINAL Setting (MIXED ORIGINAL Parameter)

7
Utility mode/Copy mode parameters
7-76 ineo 163/213
Selecting the default "MIXED ORIGINAL" setting ("MIXED ORIGINAL"
parameter)
2
Note
A setting can be selected for this parameter only if the optional document
feeder or reverse automatic document feeder is installed.
1 Display the "COPY SETTING 2" menu.
– Refer to "Displaying the "COPY SETTING 2" menu" on page 7-71.
2 Press the [+] or [,] key until "MIXED ORIGINAL" is selected, and then
press the [OK] key.
UTILITY MODE
RETURN
COPY SETTING 2
COPY SETTING 2
DUPLEX COPY
MIXED ORIGINAL
CRISSCROSS MODE