7
Utility mode/Copy mode parameters
7-28 ineo 163/213
7.5 CUSTOM SIZE MEMORY
From the "CUSTOM SIZE MEMORY" menu, two of the most frequently used
custom paper sizes can be registered. The custom paper sizes registered
here can be selected for the size of paper loaded in the 1st paper drawer by
selecting "PAPER SOURCE SETUP" in Utility mode, then selecting "TRAY1
PAPER", then "PAPER SIZE".
CUSTOM SIZE MEMORY options
Registering a custom paper size
1 Press the [Utility] key.
The "UTILITY MODE" menu appears.
2 Press the [+] or [,] key until "CUSTOM SIZE MEMORY" is selected,
and then press the [OK] key.
The "CUSTOM SIZE MEMORY" menu appears.
No. CUSTOM SIZE MEMO-
RY
Description
1 MEMORY1 Frequently used paper sizes can be registered and recalled
when needed. The following sizes can be registered.
Length: 140 mm to 432 mm
Width: 90 mm to 297 mm
2MEMORY2
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
To Next Page
Loading...
