Develop ineo 163 - Changing the Image Quality Level When the Original Glass Is Used DENSITY (BOOK) Parameter)

Utility mode/Copy mode parameters
7
ineo 163/213 7-13
Changing the image quality level when the original glass is used
("DENSITY (BOOK)" parameter)
1 Display the "MACHINE SETTING" menu.
– Refer to "Displaying the "MACHINE SETTING" menu" on page 7-7.
2 Press the [+] or [,] key until "DENSITY (BOOK)" is selected, and then
press the [OK] key.
3 Press the [+] or [,] key until "MODE1" or "MODE2" is selected, and
then press the [OK] key.
The "MACHINE SETTING" menu appears again.
UTILITY MODE
PAPER SOURCE SETUP
MACHINE SETTING
CUSTOM SIZE MEMORY
MACHINE SETTING
DENSITY(BOOK)
DENSITY(ADF)
PRINT DENSITY
DENSITY(BOOK)
MODE2
MODE1