Develop ineo 163 - Page 148

5
Making copies
5-50 ineo 163/213
4 Press the [+] or [,] key until "SIZE INPUT" is selected, and then press
the [OK] key.
5 Use the keypad to type in "200" for the length (X), and then press the
[OK] key.
– The paper length (X) can be set between 140 mm and 432 mm.
– Refer to the diagram at the right
and be sure to specify the paper
width and length measurements
correctly.
BYPASS PAPER SIZE
SIZE INPUT
INCH
MEMORY1:[216/279]
BYPASS PAPER SIZE
Y=279( 90-297)
X=200(140-432) x
length (X)
width (Y)